Pairwise counting: Difference between revisions
(Cleanup (remove duplicate references). Also clarify writein handling.) 
(Move image from top to bottom) 

Line 1:  Line 1:  
⚫  
'''Pairwise counting''' is the process of considering a set of items, comparing one pair of items at a time, and for each pair counting the comparison results. In the context of voting theory, it involves comparing pairs of candidates or winner sets (usually using majority rule) to determine the winner and loser of the [[Pairwise matchuppairwise matchup]]. This is done by looking at voters' (usually [[Ranked ballotranked]] or [[Rated ballotrated]]) ballots to count, for each pair of candidates, which one they indicated a preference for, if they did. The [[pairwise preference]] article discusses how pairwise comparison information can be used. 
'''Pairwise counting''' is the process of considering a set of items, comparing one pair of items at a time, and for each pair counting the comparison results. In the context of voting theory, it involves comparing pairs of candidates or winner sets (usually using majority rule) to determine the winner and loser of the [[Pairwise matchuppairwise matchup]]. This is done by looking at voters' (usually [[Ranked ballotranked]] or [[Rated ballotrated]]) ballots to count, for each pair of candidates, which one they indicated a preference for, if they did. The [[pairwise preference]] article discusses how pairwise comparison information can be used. 

Line 297:  Line 296:  
===Cardinal methods === 
===Cardinal methods === 

See [[Pairwise preference#Strength of preference]] and [[rated pairwise preference ballot]]. 
See [[Pairwise preference#Strength of preference]] and [[rated pairwise preference ballot]]. 

+  
+  ===Notes=== 

⚫  
==References== 
==References== 
Revision as of 04:46, 24 May 2020
Pairwise counting is the process of considering a set of items, comparing one pair of items at a time, and for each pair counting the comparison results. In the context of voting theory, it involves comparing pairs of candidates or winner sets (usually using majority rule) to determine the winner and loser of the pairwise matchup. This is done by looking at voters' (usually ranked or rated) ballots to count, for each pair of candidates, which one they indicated a preference for, if they did. The pairwise preference article discusses how pairwise comparison information can be used.
Most, but not all, election methods that meet the Condorcet criterion or the Condorcet loser criterion use pairwise counting.^{[nb 1]} See the Condorcet section for more information on the use of pairwise counting in Condorcet methods.
Procedure
Examples
Example without numbers
As an example, if pairwise counting is used in an election that has three candidates named A, B, and C, the following pairwise counts are produced:
 Number of voters who prefer A over B
 Number of voters who prefer B over A
 Number of voters who have no preference for A versus B
 Number of voters who prefer A over C
 Number of voters who prefer C over A
 Number of voters who have no preference for A versus C
 Number of voters who prefer B over C
 Number of voters who prefer C over B
 Number of voters who have no preference for B versus C
Alternatively, the words "Number of voters who prefer A over B" can be interpreted as "The number of votes that help A beat (or tie) B in the A versus B pairwise matchup".
If the number of voters who have no preference between two candidates is not supplied, it can be calculated using the supplied numbers. Specifically, start with the total number of voters in the election, then subtract the number of voters who prefer the first over the second, and then subtract the number of voters who prefer the second over the first.
These counts can be arranged in a pairwise comparison matrix^{[1]} or outranking matrix^{[2]} table (though it could simply be called the "candidate headtohead matchup table") such as below.
A  B  C  

A  A > B  A > C  
B  B > A  B > C  
C  C > A  C > B 
In cases where only some pairwise counts are of interest, those pairwise counts can be displayed in a table with fewer table cells.
Note that since a candidate can't be pairwise compared to themselves (for example candidate A can't be compared to candidate A), the cell that indicates this comparison is always empty.
In general, for N candidates, there are 0.5*N*(N1) pairwise matchups. For example, for 2 candidates there is one matchup, for 3 candidates there are 3 matchups, for 4 candidates there are 6 matchups, for 5 candidates there are 10 matchups, for 6 candidates there are 15 matchups, and for 7 candidates there are 21 matchups.
Example with numbers
Imagine that Tennessee is having an election on the location of its capital. The population of Tennessee is concentrated around its four major cities, which are spread throughout the state. For this example, suppose that the entire electorate lives in these four cities, and that everyone wants to live as near the capital as possible.
The candidates for the capital are:
 Memphis, the state's largest city, with 42% of the voters, but located far from the other cities
 Nashville, with 26% of the voters, near the center of Tennessee
 Knoxville, with 17% of the voters
 Chattanooga, with 15% of the voters
The preferences of the voters would be divided like this:
42% of voters (close to Memphis) 
26% of voters (close to Nashville) 
15% of voters (close to Chattanooga) 
17% of voters (close to Knoxville) 





These ranked preferences indicate which candidates the voter prefers. For example, the voters in the first column prefer Memphis as their 1st choice, Nashville as their 2nd choice, etc. As these ballot preferences are converted into pairwise counts they can be entered into a table.
The following squaregrid table displays the candidates in the same order in which they appear above.
... over Memphis  ... over Nashville  ... over Chattanooga  ... over Knoxville  
Prefer Memphis ...    42%  42%  42% 
Prefer Nashville ...  58%    68%  68% 
Prefer Chattanooga ...  58%  32%    83% 
Prefer Knoxville ...  58%  32%  17%   
The following tally table shows another table arrangement with the same numbers.
All possible pairs of choice names 
Number of votes with indicated preference  Margin  

Prefer X over Y  Equal preference  Prefer Y over X  
X = Memphis Y = Nashville 
42%  0  58%  16% 
X = Memphis Y = Chattanooga 
42%  0  58%  16% 
X = Memphis Y = Knoxville 
42%  0  58%  16% 
X = Nashville Y = Chattanooga 
68%  0  32%  +36% 
X = Nashville Y = Knoxville 
68%  0  32%  +36% 
X = Chattanooga Y = Knoxville 
83%  0  17%  +66% 
Example using various ballot types
[See File:Pairwise_counting_procedure.png for an image explaining all of this).
Suppose there are five candidates A, B, C, D and E.
Sufficiently expressive ballot types
Ranked ballots
Using ranked ballots, suppose two voters submit the ranked ballots A>B>C, which means they prefer A over B, B over C, and A over C, with all three of these ranked candidates being preferred over either D or E. This assumes that unranked candidates are ranked equally last.
Rated ballots
Now suppose the same two voters submit rated ballots of A:5 B:4 C:3, which means A is given a score of 5, B a score of 4, and C a score of 3, with D and E left blank. Pairwise preferences can be inferred from these ballots. Specifically A is scored higher than B, and B is scored higher than C. It is known that these ballots indicate that A is preferred over B, B over C, and A over C. If blank scores are assumed to mean the lowest score, which is usually a 0, then A and B and C are preferred over D and E.
In a pairwise comparison table, this can be visualized as (organized by Copeland ranking):
A  B  C  D  E  

A    2  2  2  2 
B  0    2  2  2 
C  0  0    2  2 
D  0  0  0    0 
E  0  0  0  0   
(star.vote offers the ability to see the pairwise matrix based off of rated ballots.)
Inexpressive ballot types
Chooseone and Approval ballots
Pairwise counting also can technically be done using Chooseone voting ballots and Approval voting ballots (by giving one vote to the marked candidate in a matchup where only one of the two candidates was marked), but such ballots do not supply information to indicate that the voter prefers their 1st choice over their 2nd choice, that the voter prefers their 2nd choice over their 3rd choice, and so on.
Dealing with unmarked/lastplace candidates
Note that when a candidate is unmarked it is generally treated as if the voter has no preference between the unmarked candidates (a candidate who is marked on the ballot is considered explicitly supported, and a candidate who is unmarked is implicitly unsupported). When the voter has no preference between certain candidates, which can also be seen by checking if the voter ranks/scores/marks multiple candidates in the same way (i.e. they say two candidates are both their 1st choice, or are both scored a 4 out of 5), then it is treated as if the voter wouldn't give a vote to any of those candidates in their matchups against each other.
Dealing with writein candidates
The difficulty of handling writein candidates depends on how a voter's preference between ranked and unranked candidates is counted.
 If the voter is treated as preferring ranked candidates over unranked candidates (which is the nearuniversal approach), then writeins can be difficult to count using pairwise counting, because the votecounters don't know who they are and thus can't directly record voter preferences in matchups between onballot mainstream candidates and writein candidates.
 If the voter is treated as having no preference between ranked and unranked candidates, then there are no issues to consider with counting writein candidates under the regular approach.
Below are some ways of dealing with writeins if unranked candidates are treated in the first way described above.
Noncomprehensive approaches
 Writein candidates can be banned. This is the usual approach.
 Writein candidates can be allowed to run, but with the caveat that only the pairwise preferences of ballots that rank them contribute votes in pairwise matchups featuring them.
 A slight modification is to comprehensively count only those writein candidates who are ranked on a significant number of ballots i.e. two rounds of counting may be necessary in each precinct sometimes, one to determine how many ballots writeins are ranked on, and a second for the major writeins.
 Writein candidates can be allowed to run, but with the caveat that only the pairwise preferences of ballots that rank them contribute votes in pairwise matchups featuring them.
Comprehensive approaches
These approaches collect all of the pairwise information for writein candidates i.e. there would be no change in vote totals if the writein candidate suddenly became one of the onballot candidates.
 In each precinct, count the number of ballots that explicitly rank each (nonwritein) candidate. When a writein candidate is found on a ballot, then before that ballot is counted, give each nonwritein candidate a number of votes against the writein equal to the number of ballots where that nonwritein candidate was explicitly ranked. Then count the ballot and treat the writein candidate as a nonwritein candidate from that point onwards (from the perspective of this algorithm).
 When creating a precinct subtotal, also record, for each candidate, how many ballots that candidate was explicitly ranked on.
 When combining the pairwise vote totals from each precinct, then if in one precinct a writein candidate wasn't marked by any voters but in another they were, then similarly treat all the ballots from the first precinct to rank every explicitly ranked candidate above the writein: for each candidate in the first precinct, against the writein in the second, add the number of voters in the first precinct who explicitly ranked that nonwritein candidate. ^{[3]}^{[4]}
 The negative votecounting approach automatically handles writeins, and requires less markings than the abovementioned approach when explicit equalrankings are counted as a vote for both candidates in a matchup. However, it requires a postprocessing stage to convert the Condorcet matrix into the more familiar form before usage by Condorcet methods.
Count complexity
Sequentially examining each rank on a voter's ballot
The naive way of counting pairwise preferences implies determining, for each pair of candidates, and for each voter, if that voter prefers the first candidate of the pair to the second or vice versa. This requires looking at ballots times.
If reading a ballot takes a lot of time, it's possible to reduce the number of times a ballot has to be consulted by noting that:
 if a voter ranks X first, he prefers X to everybody else
 if he ranks Y second, he prefers Y to everybody but X
and so on. In other words, a ballot can be more quickly counted by examining candidates in each of its ranks sequentially from the highest rank on downward. The pairwise matrix still has to be updated times, but a ballot only has to be consulted times at most. If the voters only rank a few preferences, that further reduces the counting time.
A special case of this speedup is to separately record the first preferences of each ballot, as in a First_past_the_post count. A voter who ranks a candidate X uniquely first must rank X above every other candidate and no other candidate above X, so there's no need to look at Y>X preferences at all.
Uses for first choice information
(This actually collects more information than the usual pairwise approach; specifically, if no voters equally rank candidates 1st, then it is possible to determine who the FPTP winner is, and further, if it can be determined that there is only one candidate in the Dominant mutual third set, then that candidate is the IRV winner.)
Techniques for when one is collecting both rated and pairwise information
If using pairwise counting for a rated method, one helpful trick is to put the rated information for each candidate in the cell where each candidate is compared to themselves. For example, if A has 50 points (based on a Score voting ballot), B has 35 points, and C has 20, then this can be represented as:
A  B  C  

A  50 points  A>B  A>C 
B  B>A  50 points  B>C 
C  C>A  C>B  50 points 
This reduces the amount of space required to store and demonstrate all of the relevant information for calculating the result of the voting method.
Pairwise counting used in unorthodox contexts
Pairwise counting can be used to tally the results of Chooseone voting, Approval voting, and Score voting; in these methods, a voter is interpreted as giving a degree of support to each candidate in a matchup, which can be reflected either using margins or (in the case of Score) the voter's support for both candidates in the matchup. See rated pairwise preference ballot#Margins and winning votes approaches for an example.
Negative votecounting approach
See Negative votecounting approach for pairwise counting for an alternative way to do pairwise counting. The negative counting approach can be faster than the approach outlined in this article in some cases; for example, a voter who votes A>B when there are 10 candidates requires 9+8=17 markings to be made to count their ballot under the usual approach, but only 3 in the negative counting approach.
Defunct sections
These sections were at one time part of this particle, but have been shifted to the Pairwise preference article. They are kept here only to avoid breaking any links pointing to them.
Election examples
See Pairwise preference#Election examples
Terminology
See Pairwise preference#Definitions.
Condorcet
See Pairwise preference#Condorcet.
Cardinal methods
See Pairwise preference#Strength of preference and rated pairwise preference ballot.
Notes
References
 ↑ Mackie, Gerry. (2003). Democracy defended. Cambridge, UK: Cambridge University Press. p. 6. ISBN 0511062648. OCLC 252507400.
 ↑ Nurmi, Hannu (2012). Felsenthal, Dan S.; Machover, Moshé (eds.). "On the Relevance of Theoretical Results to Voting System Choice". Electoral Systems. Springer Berlin Heidelberg: 255–274. doi:10.1007/9783642204418_10. ISBN 9783642204401. Retrieved 20200116.
 ↑ "Condorcet method". Electowiki. 20200514. Retrieved 20200514.
 ↑ "r/EndFPTP  Comment by u/ASetOfCondors on "Possible solution to the Condorcet writein problem"". reddit. Retrieved 20200514.
Notes
 ↑ Nanson meets the Condorcet criterion and Instantrunoff voting meets the Condorcet loser criterion.